Shop Cylinder Sleeves

The inner diameter of all sleeves are undersized and must be finished to desired size. Please read the information below before you order.

For your information: The sleeves are not cut to standard size because of the installation process of the cylinder sleeve. The cylinder sleeve is an interference fit in the block of .004-.005 inches. In order to install a cylinder sleeve, the block must be heated to 400 Degrees for 1 hour. Then you can install the sleeve and line up the porting. Allow the block to cool to the touch, and then you must machine the sleeve to the desired size. Also the surface of the sleeve will have to be machined to match the surface of the cylinder block. You can also Install the sleeve with a press (cooling the sleeve first in a freezer for about 1 hour). Make sure you line up the porting and the follow the same procedure to finish to the desired size. Because the sleeve is an interference fit in the block, when the block is heated and then cooled the sleeve will not remain completely round. This is why the cylinder sleeve is machined under the standard size.

New Cylinder Sleeve for Evinrude E-Tec 115hp V4  2007 3.600" Bore 1218FPA  New Cylinder Sleeve for Evinrude E-Tec 115hp V4  2008-Up 3.600" Bore 1228FPA New Cylinder Sleeve for Evinrude E-Tec 150-175hp 2007-2008 3.600" Bore 3.800 O.D. Length 4.665" 1210FPA
Cylinder Sleeve Evinrude E-Tec 115hp 2007 3.600" BoreCylinder Sleeve Evinrude E-Tec 115hp 2008-Up 3.600" BoreCylinder Sleeve Evinrude E-Tec 150-175hp 2007-2008 3.600" Bore

 New Cylinder Sleeve for Evinrude E-Tec 115hp V4  2007 3.600" Bore 1218FPA

 New Cylinder Sleeve for Evinrude E-Tec 115hp V4  2008-Up 3.600" Bore 1228FPA

New Cylinder Sleeve for Evinrude E-Tec 150-175hp 2007-2008 3.600" Bore 3.800 O.D. Length 4.665" 1210FPA

$136.70

$122.27

$158.37

$141.66

$128.50

$114.94

New Cylinder Sleeve for Evinrude E-Tec 200hp 2009-Up 3.600" Bore 3.800 O.D. Length 4.665" 1233FPA New Cylinder Sleeve for Evinrude E-Tec 225hp 2009-Up 3.854" Bore 4.055" O.D 1243FA New Cylinder Sleeve for Johnson & Evinrude 75-90hp E-Tech Cylinder 2009-2011 3.600" Bore 3.800" O.D. 5.055" Length 1227FA
Cylinder Sleeve Evinrude E-Tec 200hp 2009-UP 3.600" Bore Cylinder Sleeve Evinrude E-Tec 225hp 3.3 Liter 2009-Up 3.854"Cylinder Sleeve Evinrude E-Tec 75-90hp 3.600" 2009-2011

New Cylinder Sleeve for Evinrude E-Tec 200hp 2009-Up 3.600" Bore 3.800 O.D. Length 4.665" 1233FPA

New Cylinder Sleeve for Evinrude E-Tec 225hp 2009-Up 3.854" Bore 4.055" O.D 1243FA

New Cylinder Sleeve for Johnson & Evinrude 75-90hp E-Tech Cylinder 2009-2011 3.600" Bore 3.800" O.D. 5.055" Length 1227FA

$158.37

$141.66

$158.37

$141.66

$158.37

$141.66

New Cylinder Sleeve for Johnson & Evinrude 75-90hp E-Tech Cylinders # 2 & 3 Only 2004 & Up 3 600" Bore 3.800" O.D. 5.055" Length 1201SA New Cylinder Sleeve for Johnson & Evinrude 75-90hp E-Tech Cylinder # 1 Only 3.600" Bore 3.800" O.D. 5.055" Length 1226SA New Cylinder Sleeve for Johnson & Evinrude 115hp Eagle Series Carbureted Models 1995-2004 3.600" Bore 3.800" O.D. 5.075" Length 1098PSA
Cylinder Sleeve Evinrude E-Tec 75-90hp 3.600" Bore Cyl # 2 & 3Cylinder Sleeve Evinrude E-Tec 75-90hp 3.600" Bore Cylinder # 1 Cylinder Sleeve Johnson Evinrude 115hp 1995-2004 3.600" Bore

New Cylinder Sleeve for Johnson & Evinrude 75-90hp E-Tech Cylinders # 2 & 3 Only 2004 & Up 3 600" Bore 3.800" O.D. 5.055" Length 1201SA

New Cylinder Sleeve for Johnson & Evinrude 75-90hp E-Tech Cylinder # 1 Only 3.600" Bore 3.800" O.D. 5.055" Length 1226SA

New Cylinder Sleeve for Johnson & Evinrude 115hp Eagle Series Carbureted Models 1995-2004 3.600" Bore 3.800" O.D. 5.075" Length 1098PSA

$134.07

$119.92

$136.70

$122.26

$111.37

$99.62

New Cylinder Sleeve for Johnson & Evinrude 150hp Ficht FFI Direct Injection Models 2000-2006 3.600" Bore 3.800" O.D. 5.075 Length 1156PSA New Cylinder Sleeve for Johnson & Evinrude 175hp Ficht FFI 1997-1999 3.600" Bore 3.800" O.D. 5.075" Length 1110PSA New Cylinder Sleeve for Johnson & Evinrude 200hp 1991-2002 3.685" Bore 3.875" O.D. 5.230" Length LA119OB
Cylinder Sleeve Johnson Evinrude 150hp Ficht FFI 2000-2006Cylinder Sleeve Johnson Evinrude 175hp 1997-1999 3.600" BoreCylinder Sleeve Johnson Evinrude 200 1991-2002 3.685" Bore

New Cylinder Sleeve for Johnson & Evinrude 150hp Ficht FFI Direct Injection Models 2000-2006 3.600" Bore 3.800" O.D. 5.075 Length 1156PSA

New Cylinder Sleeve for Johnson & Evinrude 175hp Ficht FFI 1997-1999 3.600" Bore 3.800" O.D. 5.075" Length 1110PSA

New Cylinder Sleeve for Johnson & Evinrude 200hp 1991-2002 3.685" Bore 3.875" O.D. 5.230" Length LA119OB

$124.10

$111.00

$124.10

$111.00

$120.00

$107.33

New Cylinder Sleeve for Johnson & Evinrude 250hp H.O. 1998-2000 3.685" Bore 1112PSA New Cylinder Sleeve for Johnson & Evinrude 90hp 60 Degree V4 1995-1999 Bore 3.600" O.D. 5.060" Length 1097PSA New Cylinder Sleeve for Evinrude E-Tec 150-175hp 2009 & Up 3.600" Bore 3.800 O.D. Length 4.665" 1232FPA
Cylinder Sleeve Johnson Evinrude 250hp H.O. 3.685" 1998-2000Cylinder Sleeve Johnson Evinrude 90hp 60 Degree 1995-1999 3.600"New Cylinder Sleeve for Evinrude E-Tec 150-175hp 2009 & Up 3.600

New Cylinder Sleeve for Johnson & Evinrude 250hp H.O. 1998-2000 3.685" Bore 1112PSA

New Cylinder Sleeve for Johnson & Evinrude 90hp 60 Degree V4 1995-1999 Bore 3.600" O.D. 5.060" Length 1097PSA

New Cylinder Sleeve for Evinrude E-Tec 150-175hp 2009 & Up 3.600" Bore 3.800 O.D. Length 4.665" 1232FPA

$107.47

$96.13

$125.00

$111.81

$158.37

$141.66

New Cylinder Sleeve for Johnson & Evinrude 120-140hp 1985-1987 3.500" Bore 3.875" O.D. 5.992" Length 1023SA New Cylinder Sleeve for Johnson & Evinrude 120-140hp 1988-1994 3.685" Bore 3.875" O.D. 5.230" Length 1002SA New Cylinder Sleeve for Johnson & Evinrude 120hp FFI 1999 & Up 3.600" Bore 3.800" O.D. 5.250" Length LA189OB
Cylinder Sleeve Johnson Evinrude 120-140hp 1985-1987 3.500" BoreCylinder Sleeve Johnson Evinrude 120-140hp 1988-1994 3.685" BoreCylinder Sleeve Johnson Evinrude 120hp Ficht FFI 3.600" Bore

New Cylinder Sleeve for Johnson & Evinrude 120-140hp 1985-1987 3.500" Bore 3.875" O.D. 5.992" Length 1023SA

New Cylinder Sleeve for Johnson & Evinrude 120-140hp 1988-1994 3.685" Bore 3.875" O.D. 5.230" Length 1002SA

New Cylinder Sleeve for Johnson & Evinrude 120hp FFI 1999 & Up 3.600" Bore 3.800" O.D. 5.250" Length LA189OB

$111.37

$99.62

$107.47

$96.13

$125.00

$111.25

New Cylinder Sleeve for Johnson & Evinrude 130hp 1995-2000 3.685" Bore 3.875" O.D. 5.225" Length 1081SA New Cylinder Sleeve for Johnson & Evinrude 135-150hp 2000 3.600" Bore 3.800" O.D. 5.075" Length 1156PSA New Cylinder Sleeve for Johnson & Evinrude 150hp Eagle Series Carbureted Models 3.600" Bore 3.800" O.D. 5.075" Length 1066PSA
Cylinder Sleeve Johnson Evinrude 130hp 1995-2000 3.685" BoreCylinder Sleeve Johnson Evinrude 135-150hp 2000 3.600" BoreCylinder Sleeve Johnson Evinrude 150hp 1991 Only 3.600" Bore

New Cylinder Sleeve for Johnson & Evinrude 130hp 1995-2000 3.685" Bore 3.875" O.D. 5.225" Length 1081SA

New Cylinder Sleeve for Johnson & Evinrude 135-150hp 2000 3.600" Bore 3.800" O.D. 5.075" Length 1156PSA

New Cylinder Sleeve for Johnson & Evinrude 150hp Eagle Series Carbureted Models 3.600" Bore 3.800" O.D. 5.075" Length 1066PSA

$107.41

$96.07

$124.10

$111.00

$111.37

$99.62

New Cylinder Sleeve for Johnson & Evinrude 150hp Carbureted 1992-2004 3.600" Bore 3.800" O.D. 5.075" Length 1045SA New Cylinder Sleeve for Johnson & Evinrude 150hp Ficht FFI 1997-1999 3.600" Bore 3.800" O.D. 5.075" Length 1116PSA New Cylinder Sleeve for Johnson & Evinrude 175hp Carbureted 1991-1995 3.600" Bore 3.800" O.D. 5.075" Length 1065PSA
Cylinder Sleeve Johnson Evinrude 150hp 1992-2004 3.600" BoreCylinder Sleeve Johnson Evinrude 150hp Ficht 1997-99 3.600" BoreCylinder Sleeve Johnson Evinrude 175hp 1991-1995 3.600" Bore

New Cylinder Sleeve for Johnson & Evinrude 150hp Carbureted 1992-2004 3.600" Bore 3.800" O.D. 5.075" Length 1045SA

New Cylinder Sleeve for Johnson & Evinrude 150hp Ficht FFI 1997-1999 3.600" Bore 3.800" O.D. 5.075" Length 1116PSA

New Cylinder Sleeve for Johnson & Evinrude 175hp Carbureted 1991-1995 3.600" Bore 3.800" O.D. 5.075" Length 1065PSA

$111.37

$99.62

$124.10

$111.00

$128.70

$115.12

New Cylinder Sleeve for Johnson & Evinrude 175hp Ficht FFI 1997-1999 3.600" Bore 3.800" O.D. 5.075" Length 1110PSA New Cylinder Sleeve for Johnson & Evinrude 175hp Ficht FFI 2000 Only 3.600" Bore 3.800" O.D. 5.075" Length 1121PSA New Cylinder Sleeve for Johnson & Evinrude 175hp 1987-1991 3.625" Bore 3.753" O.D. 5.125" Length 1001SA
Cylinder Sleeve Johnson Evinrude 175hp Ficht '97-99 3.600" BoreCylinder Sleeve Johnson Evinrude 175hp Ficht 2000 3.600" BoreCylinder Sleeve Johnson Evinrude 175hp X-Flow '87-91 3.625" Bore

New Cylinder Sleeve for Johnson & Evinrude 175hp Ficht FFI 1997-1999 3.600" Bore 3.800" O.D. 5.075" Length 1110PSA

New Cylinder Sleeve for Johnson & Evinrude 175hp Ficht FFI 2000 Only 3.600" Bore 3.800" O.D. 5.075" Length 1121PSA

New Cylinder Sleeve for Johnson & Evinrude 175hp 1987-1991 3.625" Bore 3.753" O.D. 5.125" Length 1001SA

$124.10

$111.69

$124.10

$111.00

$88.24

$78.93

New Cylinder Sleeve for Johnson & Evinrude 20-40hp 1981-2004 3.000" Bore 3.125" O.D. 5.250" Length 1011SA New Cylinder Sleeve for Johnson & Evinrude 200-225hp 1985-1987 3.500" Bore 3.875" O.D. 5.992" Length 1023SA-1 New Cylinder Sleeve for Johnson & Evinrude 200-225hp Ficht FFI 1999-2004 with 4 Finger Ports 3.685" Bore 3.975" O.D. 5.230" Length .150" Flange Thickness 1113FA
Cylinder Sleeve Johnson Evinrude 20-40hp 1981-2004 3.000" BoreCylinder Sleeve Johnson Evinrude 200-225hp 1985-1987 3.500" BoreCylinder Sleeve Johnson Evinrude 200-225hp Ficht 3.685" '99-04

New Cylinder Sleeve for Johnson & Evinrude 20-40hp 1981-2004 3.000" Bore 3.125" O.D. 5.250" Length 1011SA

New Cylinder Sleeve for Johnson & Evinrude 200-225hp 1985-1987 3.500" Bore  3.875" O.D. 5.992" Length 1023SA-1

New Cylinder Sleeve for Johnson & Evinrude 200-225hp Ficht FFI 1999-2004 with 4 Finger Ports 3.685" Bore 3.975" O.D. 5.230" Length .150" Flange Thickness 1113FA

$59.40

$53.13

$111.37

$99.62

$136.13

$121.76

New Cylinder Sleeve for Johnson & Evinrude 200-250hp 1988-1992 3.685" Bore 3.875" O.D. 5.225" Length 1025SA New Cylinder Sleeve for Johnson & Evinrude 200hp Ficht 2001-2004 3.854" Bore 4.053" O.D 1144FA New Cylinder Sleeve for Johnson & Evinrude 225-250hp Ficht 2001-2003 3.854" Bore 4.053" O.D. 5.445" Length .125" Flange Thickness 1135FA
Cylinder Sleeve Johnson Evinrude 200-250hp 1988-'92 3.685" BoreCylinder Sleeve Johnson Evinrude 200hp Ficht 3.854" 2001-2004Cylinder Sleeve Johnson Evinrude 225-250 Ficht 3.854" 2001-'03

New Cylinder Sleeve for Johnson & Evinrude 200-250hp 1988-1992 3.685" Bore 3.875" O.D. 5.225" Length 1025SA

New Cylinder Sleeve for Johnson & Evinrude 200hp Ficht 2001-2004 3.854" Bore 4.053" O.D 1144FA

New Cylinder Sleeve for Johnson & Evinrude 225-250hp Ficht 2001-2003 3.854" Bore 4.053" O.D. 5.445" length .125" Flange Thickness 1135FA

$107.47

$96.13

$136.13

$121.76

$136.13

$121.76

New Cylinder Sleeve for Johnson & Evinrude 235hp 1980-1986 3.625" Bore 3.752" O.D. 5.125" Length 1001SA New Cylinder Sleeve for Johnson & Evinrude 250hp 1993-1995 3.685" Bore 3.875" O.D. 5.225" Length 1040SA New Cylinder Sleeve for Johnson & Evinrude 250hp HO 3.685" Bore 3.875" O.D. 5.225" Length 1112SA
Cylinder Sleeve Johnson Evinrude 235hp X-Flow '80-86 3.625" BoreCylinder Sleeve Johnson Evinrude 250hp 1993-1995 3.685" BoreCylinder Sleeve Johnson Evinrude 250hp HO 1998-'00 3.685" Bore

New Cylinder Sleeve for Johnson & Evinrude 235hp 1980-1986 3.625" Bore 3.752" O.D. 5.125" Length 1001SA

New Cylinder Sleeve for Johnson & Evinrude 250hp 1993-1995 3.685" Bore 3.875" O.D. 5.225" Length 1040SA

New Cylinder Sleeve for Johnson & Evinrude 250hp HO 3.685" Bore 3.875" O.D. 5.225" Length 1112SA

$88.24

$78.93

$107.41

$96.07

$107.41

$96.66

New Cylinder Sleeve Johnson & Evinrude 25hp 3 Cylinder 1998-2000 2.350" Bore L185OB New Cylinder Sleeve for Johnson & Evinrude 275hp 1985-1987 3.500" Bore 3.875" O.D. 5.992" Length 1013SA New Cylinder Sleeve for Johnson & Evinrude 30-35hp 1998-2000 2.500" Bore 2.702" O.D. 4.687" Length 1141SA
Cylinder Sleeve Johnson Evinrude 25hp 3 Cylinder 2.350" BoreCylinder Sleeve Johnson Evinrude 275hp 1985-1987 3.500" BoreCylinder Sleeve Johnson Evinrude 30-35hp 1998-2000 2.500" Bore

New Cylinder Sleeve Johnson & Evinrude 25hp 3 Cylinder 1998-2000 2.350" Bore L185OB

New Cylinder Sleeve for Johnson & Evinrude 275hp 1985-1987 3.500" Bore 3.875" O.D. 5.992" Length 1013SA

New Cylinder Sleeve for Johnson & Evinrude 30-35hp 1998-2000 2.500" Bore 2.702" O.D. 4.687" Length 1141SA

$86.50

$77.85

$111.37

$99.62

$114.16

$102.11

 New Cylinder Sleeve for Johnson & Evinrude 300hp 1985-1987 3.500" Bore 1068SA New Cylinder Sleeve for Johnson & Evinrude 300hp 1988-1993 Models with Oval Port 3.685" Bore 3.875" O.D. 5.225" Length 1040SA-1 New Cylinder Sleeve for Johnson & Evinrude 300hp 1988-1995 Models with Bridged Exhaust Port 3.685" Bore 3.875" O.D. 5.230" Length 1002SA-1
Cylinder Sleeve Johnson Evinrude 300hp 1985-1987 3.500" BoreCylinder Sleeve Johnson Evinrude 300hp 1988-1993 3.685" BoreCylinder Sleeve Johnson Evinrude 300hp 1988-1995 3.685" Bore

 New Cylinder Sleeve for Johnson & Evinrude 300hp 1985-1987 3.500" Bore 1068SA

New Cylinder Sleeve for Johnson & Evinrude 300hp 1988-1993 Models with Oval Port 3.685" Bore 3.875" O.D. 5.225" Length 1040SA-1

New Cylinder Sleeve for Johnson & Evinrude 300hp 1988-1995 Models with Bridged Exhaust Port 3.685" Bore 3.875" O.D. 5.230" Length 1002SA-1

$102.45

$91.64

$107.41

$96.07

$107.47

$96.13

New Cylinder Sleeve for Johnson & Evinrude 40-60hp 2 Cylinder 1980-2004 3.1875" Bore 3.442" O.D. 4.585" Length 1007SA New Cylinder Sleeve for Johnson & Evinrude 40-60hp 2 Cylinder E-Tech 2004-Up 3.600" Bore 3.800" O.D. 5.060" Length 1229SA New Cylinder Sleeve for Johnson & Evinrude 40-70hp 2 Cylinder 1993-2000 3.1875" Bore 3.444" O.D. 4.540" Length 1088SA
Cylinder Sleeve Johnson Evinrude 40-60hp 1980-2004 3.1875" BoreCylinder Sleeve Johnson Evinrude 40-60hp 2004-Up 3.600" BoreCylinder Sleeve Johnson Evinrude 40-70hp 1993-00 3.1875" Bore

New Cylinder Sleeve for Johnson & Evinrude 40-60hp 2 Cylinder 1980-2004 3.1875" Bore 3.442" O.D. 4.585" Length 1007SA

New Cylinder Sleeve for Johnson & Evinrude 40-60hp 2 Cylinder E-Tech 2004-Up 3.600" Bore 3.800" O.D. 5.060" Length 1229SA

New Cylinder Sleeve for Johnson & Evinrude 40-70hp 2 Cylinder 1993-2000 3.1875" Bore 3.444" O.D. 4.540" Length 1088SA

$104.83

$93.77

$134.07

$119.92

$104.83

$93.77

New Cylinder Sleeve for Johnson & Evinrude 60-70hp 3 Cylinder 1986-2000 3.1875" Bore 3.444" O.D. 4.750" Length 1006SA New Cylinder Sleeve for Johnson & Evinrude 60-75hp 3 Cylinder 1972-1989 3.000" Bore 3.190" O.D. 4.750" Length 1003SA New Cylinder Sleeve for Johnson & Evinrude 70-90hp 3 Cylinder E-Tech 2004-Up 3.800" O.D. 5.060" Length LA196OB
Cylinder Sleeve Johnson Evinrude 60-70hp 1986-00 3.1875" BoreCylinder Sleeve Johnson Evinrude 60-75hp 1972-1989 3.000" BoreCylinder Sleeve Johnson Evinrude 70-90hp 2004-Up 3.600" Bore

New Cylinder Sleeve for Johnson & Evinrude 60-70hp 3 Cylinder 1986-2000 3.1875" Bore 3.444" O.D. 4.750" Length 1006SA

New Cylinder Sleeve for Johnson & Evinrude 60-75hp 3 Cylinder 1972-1989 3.000" Bore 3.190" O.D. 4.750" Length 1003SA

New Cylinder Sleeve for Johnson & Evinrude 70-90hp 3 Cylinder E-Tech 2004-Up 3.800" O.D. 5.060" Length LA196OB

$104.83

$93.77

$105.03

$93.94

$120.00

$108.00

New Cylinder Sleeve for Johnson & Evinrude 80-235hp Crossflow & Turbo Jet Models 1971-1998 3.500" Bore 3.628" O.D. 5.125" Length 1000SA New Cylinder Sleeve for Johnson & Evinrude 9.9-15hp 1974-1992 2.188" Bore 2.313" O.D. 3.530" Length 1031SA TSM Performance Cylinder Sleeve 1147SA Johnson & Evinrude 9.9-15hp 1993-2004
Cylinder Sleeve Johnson Evinrude 80-235hp 1971-98 3.500" BoreCylinder Sleeve Johnson Evinrude 9.9-15hp 1974-1992 2.188" BoreCylinder Sleeve Johnson Evinrude 9.9-15hp 1993-2004 2.375" Bore

New Cylinder Sleeve for Johnson & Evinrude 80-235hp Crossflow & Turbo Jet Models 1971-1998 3.500" Bore 3.628" O.D. 5.125" Length 1000SA

New Cylinder Sleeve for Johnson & Evinrude 9.9-15hp 1974-1992 2.188" Bore 2.313" O.D. 3.530" Length 1031SA

 New TSM Performance Cylinder Sleeve for Johnson & Evinrude 9.9-15hp 1993-2004 2.375" Bore 1147SA

$88.24

$78.93

$80.84

$72.75

$80.84

$72.31

 New Cylinder Sleeve for Johnson & Evinrude 90hp Eagle Series Ficht FFI Models 1999-2006 3.600" Bore 1125PSA
Cylinder Sleeve Johnson Evinrude 90-115hp 1999-2006 3.600" Bore

 New Cylinder Sleeve for Johnson & Evinrude 90hp Eagle Series Ficht FFI Models 1999-2006 3.600" Bore 1125PSA

$124.10

$111.00